Set kVaser, USB CAN Module

When connecting the kVaser, if there is a previous connection history, the ServoMax Engine remembers the previous settings. Follow these procedures when connecting the kVaser for the first time or when there is a change in the connection:

(a) Click SET kVaser, USB CAN MODULE in the Settings.

(b) Click FIND CAN PORT to automatically search for the kVaser currently connected to the PC.

(c) Set the baudrate according to the servo to be tested.

(d) Click the CH A and/or CH B buttons (one or both) as needed to activate CAN communication. The activated CAN Channel will be illuminated as shown below.