Tx and Save Rate

Setting Data Save Interval

The data save interval is determined by the product of the TX INTERVAL and TX Rate.

TX INTERVAL[ms]: Set the interval (in milliseconds) at which TX will be sent.

TX Rate(x Multiple): Set how many TXs will be sent before saving the data.

For example, if TX INTERVAL is set to 20 ms and MULTIPLE TX is set to 5, TX will be sent every 20 ms and the data will be saved once for every 5 TXs sent.

- Enable additional Data Save : Save additional raw data at the point of an error.

For example, if set to 60 seconds, the data will be saved for 30 seconds before and 30 seconds after the error, totaling 60 seconds of data. Detailed explanations can be found at the following path: SAVE Raw data